Originally published 2020-10-15.

Image: Hacksmith Industries
In October 2020 the Canadian engineer and YouTuber James Hobson, known online as The Hacksmith, showed off what his team called a retractable "proto-lightsaber". It is not the impossible blade from Star Wars. It is a carefully shaped jet of burning gas, fed by a fuel pack worn on the back, that glows like a lightsaber and reaches about 4,000°F (roughly 2,200°C), hot enough to cut through steel plate. Guinness World Records later recognised it as the world's first retractable protosaber.
Who is The Hacksmith?
Hobson, born in 1990, trained as an engineer and runs Hacksmith Industries, a workshop-and-media company based in Ontario, Canada. Its best-known YouTube series, Make It Real, takes gadgets from films, comics and games and tries to build working versions. Past projects include an exosuit, a half-scale replica of the Tesla Cybertruck and a full set of Mandalorian armour.
The lightsaber has been a recurring goal for the channel. Earlier attempts produced glowing props and blades that could not retract. The 2020 build was the first the team felt could be called a real step towards the movie weapon.
How the proto-lightsaber works
The handle is essentially a precision torch. Hoses run from a backpack containing propane and oxygen, and the two gases mix in the hilt before being forced out through a nozzle. Igniting the mix produces a tight, high-speed flame around a metre long. Shutting off the gas makes the blade vanish, which gives the retractable effect that defeated earlier designs.
In the video, Hobson explains why the team did not chase a "true" plasma blade. Containing plasma in a beam would need an extremely strong magnetic field, which in practice would mean building the sword inside a box lined with electromagnets. Physics, not budget, was the limit, so the team chose gas.
The colour trick is old chemistry. Certain metal salts give a flame a characteristic colour when they burn, the same principle behind fireworks and school flame tests. The team said that by adding different salts to the gas flow the blade could be tinted, with green, red and yellow shown in the demonstration.
Here is the original build video from Hacksmith Industries:
Is it really plasma?
The video opens with the claim: "We have created the world's first retractable, plasma-based lightsabre." That wording is partly marketing. Scientists describe a flame as a plasma only when it is hot enough to contain a dense population of ionised gas. Hydrocarbon flames are mostly hot gas with a small ionised fraction, so calling the blade a gas flame, or at most a weakly ionised one, is more accurate.
The temperature claim, on the other hand, is believable. Reference figures put an oxygen and propane flame at around 2,250°C, or about 4,100°F, which lines up with the 4,000°F quoted by the team. Oxy-acetylene torches used by welders run hotter still, above 3,000°C.
How it cuts through metal
The demonstrations show the blade slicing steel and snapping a titanium bar, and the team said it later cut through a steel door for supporters on Patreon. This is less mysterious than it looks. Industrial oxy-fuel cutting works in a similar way: the flame heats steel to its ignition temperature, and a stream of oxygen then makes the iron burn and blows the molten oxide away. Much of the heat in a real cut comes from that chemical reaction rather than from the flame alone.
The same science explains the limits. Steel and iron cut relatively easily this way, while stainless steel resists because it does not burn readily. So "cuts through almost anything" is an overstatement, even if the results on screen are dramatic.
How it compares with the film weapon
The lightsaber first appeared in Star Wars in 1977. On set, the blades were rods coated in reflective material, and animators later painted the glow onto the film frame by frame. The famous hum was created by the sound designer Ben Burtt from the drone of projector motors and electrical interference. In the story, the blade is a contained beam powered by a kyber crystal: weightless, silent apart from its hum and safe to hold close to the body.
The Hacksmith version shares the look and the retractable blade, but not much else. It needs a fuel backpack and hoses, it radiates intense heat in every direction and it cannot block another blade, because two flames simply pass through each other. As a piece of engineering showmanship it is impressive; as a duelling weapon it is a non-starter.
Safety: please do not try this at home
A handheld oxy-propane torch is dangerous equipment. Flashback, where the flame travels back into the hoses, can cause an explosion that injures or kills the user, which is why professional rigs use flashback arrestors, secure cylinders and trained operators. Eye protection is essential against glare and sparks, and anything within reach of a 2,000°C flame can catch fire instantly. Hacksmith's own videos carry an entertainment-only disclaimer, and their team works with industrial safety gear for good reason.
It is also worth remembering what the camera does not show. Build videos compress weeks of testing, failed prototypes and safety checks into a few minutes, and the confident handling on screen comes from a team that has spent years working with torches, cutters and pressurised gas. The finished clip makes the project look simpler than it is.
If the video has inspired you, there are safer ways in: maker spaces, welding courses and the many hobby builders who create light-up replica sabres with LEDs and sound boards.
Sources: Hacksmith Industries: 4000° plasma proto-lightsaber build (YouTube, 8 October 2020); Wikipedia: Hacksmith Industries; Wikipedia: Oxy-fuel welding and cutting; Wikipedia: Flame; Wikipedia: Lightsaber.

COMMENTS