
No building is truly earthquake-proof, but engineers can make structures that stay standing and protect the people inside during very strong shaking. They do it in three main ways: by separating a building from the moving ground (base isolation), by adding devices that soak up or counter the motion (damping), and by giving the structure enough stiffness and flexibility to bend without breaking.
The five landmarks below each show one of these ideas at large scale: an airport terminal in Istanbul, a pyramid-shaped tower in San Francisco, the world's tallest building in Dubai, a typhoon-battered skyscraper in Taipei and the world's largest indoor arena in the Philippines. For each, we explain what the building does and what claims about it are well documented.
Why earthquakes damage buildings

The Earth's outer shell is split into tectonic plates that slowly move over the hotter, softer rock beneath. That movement is driven by heat escaping from the planet's interior, through slow convection in the mantle and the pull of sinking plate edges. Where plates collide, pull apart or slide past each other, stress builds up along faults until the rock suddenly slips. The released energy travels outwards as seismic waves.
The size of an earthquake is now usually given on the moment magnitude scale (written Mw). The older Richter scale is still mentioned in the news, but seismologists prefer moment magnitude for large events because it reflects the total energy released more reliably.
For a building, the main danger is sideways shaking. Most structures are designed to carry weight downwards; an earthquake suddenly pushes the ground back and forth beneath them, so walls, columns and joints must resist forces they normally never feel. Tall buildings also have a natural rhythm of swaying, and if the ground shakes at a similar rhythm the motion can grow.
The short video below, featuring geologist Iain Stewart, gives a clear visual introduction to how earthquakes happen and how they affect structures.
Sabiha Gökçen Airport, Istanbul: sitting on isolators

Istanbul lies close to the North Anatolian Fault, one of the most active faults in the world. In 1999 the nearby İzmit earthquake killed more than 17,000 people, so engineers designing the city's second international airport terminal took seismic risk very seriously.
The main terminal at Sabiha Gökçen, on the Asian side of the city, opened on 31 October 2009. It rests on base isolators, bearings placed between the foundations and the building above. According to the engineering firm Arup, which designed the structure, about 300 isolators support the terminal, are intended to cope with an earthquake of around magnitude 8.0, and cut the sideways forces reaching the building by roughly 80 percent. Wikipedia's overview of seismic isolation lists the terminal as the largest base-isolated structure in the world.
The benefit is practical as well as structural: an airport needs to keep working after a disaster, because it becomes a lifeline for rescue teams and supplies.
Transamerica Pyramid, San Francisco: a shape that shrugs off shaking

The 48-storey Transamerica Pyramid, designed by architect William Pereira, was built between 1969 and 1972. San Francisco sits between two major sources of earthquakes, the San Andreas and Hayward faults, so the tower was engineered for heavy shaking.
Its tapering shape keeps much of the weight low. Above the ground floor, a truss system carries both vertical and horizontal loads, with interior frames running far up the tower and diagonal bracing that resists twisting. The tower stands on a massive concrete mat foundation about 9 feet (2.7 m) thick, poured continuously over roughly three days.
The design was tested on 17 October 1989, when the Loma Prieta earthquake (magnitude 6.9 Mw) struck about 60 miles away. US Geological Survey instruments inside the building recorded the top floor swaying more than a foot from side to side as the tower shook for over a minute. The building was not damaged and no one inside was seriously hurt. Experts note that this does not guarantee safety in every future quake; the USGS has listed the tower among buildings that could be vulnerable because of a welding technique used in that era.
Burj Khalifa, Dubai: a stiff, buttressed core

At 828 metres, the Burj Khalifa has been the world's tallest building since it opened in January 2010. Its structure, engineered by Skidmore, Owings & Merrill under chief structural engineer Bill Baker, is mainly reinforced concrete arranged as a "buttressed core": a central core holding the lifts, supported on three sides by wings that brace it like the legs of a tripod.
That Y-shaped plan makes the tower very stiff against both sideways bending and twisting. According to the building's developers, outrigger walls at the mechanical floors tie the outer columns to the core, so the perimeter helps resist sideways forces as well as carrying weight. Below ground, the tower rests on 192 piles, each 1.5 m wide and 43 m long.
For a building this tall, wind is usually the bigger day-to-day challenge, and the tapering, stepped shape was refined in wind-tunnel tests to break up swirling winds. Dubai's earthquake risk is moderate, but the design also drew on seismic and soil studies to account for shaking from more distant quakes.
Taipei 101: the giant pendulum

Taipei 101, designed by C.Y. Lee and C.P. Wang and completed in 2004, rises 508 metres in a city exposed to both typhoons and earthquakes. Its engineers designed it to survive the strongest earthquake expected in a 2,500-year period, even though a major fault lies only about 200 metres away.
The structure uses a strong core and outrigger trusses every eight floors that link the core columns to massive columns at the edge of the building. Its foundation includes 380 piles driven deep into the ground, many of them reaching bedrock.

Taipei 101's tuned mass damper [Image Source: Taipei 101]
The tower is famous for its tuned mass damper: a steel sphere 5.5 m across and weighing 660 tonnes, built from 41 welded steel plates and hung between the 92nd and 88th floors. When the building sways one way, the heavy ball lags behind and pushes the other way, and hydraulic arms absorb the energy. It can reduce the tower's movement by up to 40 percent. The damper mainly calms wind-driven sway; in 2015 Typhoon Soudelor made it swing a record one metre. It is often called the largest visible damper ball in the world, and visitors can see it from the observation floors.
Philippine Arena, Bulacan: a huge roof built for quakes and typhoons

The Philippines sits on the Pacific "Ring of Fire", where frequent earthquakes, volcanic eruptions and typhoons put buildings under constant threat. The Philippine Arena, in Ciudad de Victoria, Bulacan, was inaugurated on 21 July 2014 ahead of the 100th anniversary of the Iglesia ni Cristo church, and seats up to 55,000 people, making it the largest indoor arena in the world by capacity.
The architecture firm Populous designed the arena, and Buro Happold was the structural engineer. The oval roof measures about 227 by 179 metres and is held up by enormous steel trusses with no columns blocking the view.

Inside the Philippine Arena with large roof truss [Image Source: Buro Happold]
To deal with earthquakes, the engineers designed the building for very high sideways forces: about a third of its dead load was allowed for as earthquake force. The structure was also divided into several separate units, so each part can move without tearing the others apart, and it stands on pile foundations. Some reports describe lead-rubber bearings separating the roof structure from the supports below; this is mentioned in engineering write-ups but not in the arena's main public profiles, so treat it as reported rather than confirmed.
Myths and practical lessons
Myth: modern skyscrapers are the most dangerous place in an earthquake. Well-engineered tall buildings often perform better than older low-rise ones. Unreinforced brick and older concrete buildings without ductile detailing have caused many deaths in past quakes.
Myth: "earthquake-proof" buildings will never be damaged. Engineers talk about "earthquake-resistant" design for a reason. The goal is to protect lives and allow safe evacuation; some damage may still occur in a very strong event.
Myth: a building that survived one quake will survive the next. Every earthquake shakes differently, depending on distance, depth and soil. A good past performance is encouraging, not a guarantee.
The practical lessons are the same for any city: enforce modern building codes, retrofit older structures, and know what to do when shaking starts. Engineering ideas once reserved for landmarks, such as base isolators and dampers, are now used in hospitals, schools and even homes in quake-prone countries. For more on remarkable buildings, see our piece on Frank Lloyd Wright's Eight-Building UNESCO Inscription.
Sources: Wikipedia, Seismic base isolation; Wikipedia, Sabiha Gökçen International Airport; Arup, Sabiha Gökçen terminal; Wikipedia, Transamerica Pyramid; USGS Fact Sheet 167-95; Vibrationdata, Transamerica Pyramid design; Wikipedia, Burj Khalifa; Wikipedia, Taipei 101; Wikipedia, Philippine Arena. Originally inspired by a feature in Interesting Engineering. Photos: Daniel Schwen via Wikimedia Commons, Arup, Burj Khalifa, C.Y. Lee, Taipei 101, Philippine Arena and Buro Happold, as credited under each image.

You write very well but atleast one time you have to check this.
ReplyDeleteGame Hack Android
You write very well but atleast one time you have to check this.
ReplyDeleteGame Hack Android
This comment has been removed by the author.
ReplyDelete