
Lua (also written Lüa) is a smart planter designed by Mu Design, a small hardware startup led by Vivien Muller. Sensors in the pot measure soil moisture, light and temperature, and a small screen on the front turns those readings into a cartoon face. The face can show 15 animated expressions, so a thirsty plant looks parched and a plant left in the dark grows vampire fangs. Mu Design launched Lua on Indiegogo in summer 2019 with a €30,000 goal and hoped to ship by December 2019. Below we explain how it was meant to work, what each face signals, how it fits the long line of digital pets that began with the Tamagotchi, and whether a gadget like this really helps houseplants survive.
How the Lua planter works
Inside the pot sit sensors for soil moisture, ambient light and temperature, plus a motion sensor that detects movement nearby and tilting of the pot. They report to a compact display set into the planter, roughly where a face would sit on a cartoon character.

The yellow version with a leafy fern on top shows the basic idea. The display normally shows a calm, content face, here caught mid-wink. You notice the pot only when something needs attention.
Setting it up was designed to take a minute. You install the Lua app, choose your plant from a database that Silicon Luxembourg reported held more than 4,000 species, and then hold the phone's screen up to the planter so that it can scan a QR code. Lua loads the ideal ranges for that species and compares its sensor readings against them. If your plant is not listed, the app lets you set your own limits.

This animation from Mu Design shows the app screen with sliders for moisture, light and temperature, a QR code for pairing, and a legend of faces around it: thirsty, vampire, cold, sick, squint and hot.
What each face means
According to My Modern Met and Silicon Luxembourg, six of the 15 animations relate to the plant's condition. The rest are playful moods that give the planter personality. Digital Trends listed the health faces like this:
- Thirsty: a panting face when the soil is too dry.
- Sick: a queasy face when the soil stays too wet.
- Vampire: fangs and a pale look when light levels are too low.
- Squint: narrowed eyes when the light is too strong.
- Cold: chattering teeth when the temperature drops too far.
- Hot: a sweating face when it gets too warm.
- Happy: a relaxed smile when everything sits within range.

A spider plant in a magenta pot shows the open-mouthed thirsty expression. It is the cue to check the soil and water if it is dry.

Here a dark red pot holding a red gerbera bares its fangs in the vampire face. This expression is Lua's way of asking to be moved closer to a window.

An orange Lua with a spider plant reacts while it is being watered from a brass can. The animations are meant to reward care as well as warn about neglect.

A yellow pot with red gerberas looks up with a wide-eyed, surprised face. This is one of the extra "mood" animations, not a care warning.
It is worth remembering what these faces are. They are the device's reading of its sensor data, not a window into the plant's feelings. Plants do not experience emotions as people do. The face is a clever interface that translates numbers into something you notice at a glance.
A planter that watches you back
Lua's motion sensor lets the eyes follow people as they walk past. The planter can also appear to doze off when nothing is happening and wake up when someone approaches. Mu Design also planned a grumpy glare for anyone, human or animal, that sneaks up on it.

A cactus in a yellow Lua pot gives a flat, unimpressed look. Without a grumpy expression now and then, the character would feel less like a pet and more like a thermometer.

In this promotional shot, a black-and-white cat sits beside the cactus planter, and the two seem to size each other up. Cat owners will appreciate the joke, though anyone with pets should check that a plant is not toxic to them before leaving it within reach.
The short clip above shows the planter's faces moving, which says more about the design than still photos can.
From Tamagotchi to plant pets
The comparison everyone made in 2019 was the Tamagotchi. Bandai launched it in Japan in November 1996, and it was created by Aki Maita of Bandai with Akihiro Yokoi of WiZ. It asked children to feed, clean and play with a pixel creature or watch it fall ill. More than 98 million units have been sold. Lua flips the concept: the creature on the screen stands in for a real living thing that genuinely needs care.

A deep red version with a fern smiles broadly. Lua was offered in two colours, a bright yellow and a dark red.
Lua was not Mu Design's first character-driven gadget. The company had earlier created ULO, a home security camera shaped like a small owl that uses expressive eyes to show what it is doing. Vivien Muller described Lua to Silicon Luxembourg as the new sibling in that family of products. The idea behind both is the same: a face is easier to read than an app notification.

A yellow Lua with a leafy plant smiles contentedly in warm sunlight. This is the face owners hope to see most of the time.

A dark red planter holding a bushy herb wears a neutral, level expression, with a ginger cat just visible behind it. Herbs on a sunny windowsill were one of the uses Mu Design showed in its campaign images.
The crowdfunding campaign, and what we do not know
Silicon Luxembourg reported that Lua's working prototype followed 13 months of development. The Indiegogo campaign sought €30,000 over 45 days to pay for tooling, components and manufacturing. Partway through, Digital Trends reported that it had raised about 43% of its goal. The 99 discounted early-bird units had sold out, and a single planter was then listed at about $112. Other reports at the time gave slightly different progress figures as the campaign moved along.
We have not been able to confirm the final total of the campaign, whether every backer received a planter, or whether Lua is still on sale today. Crowdfunding backs an idea, not a finished product, and even Digital Trends reminded readers that pledges do not guarantee delivery. If you are interested in Lua or a similar device, check the maker's own site for current models, prices and support before ordering.
Can a smart planter really keep plants alive?
A sensor-based pot can help with the most common houseplant mistakes, provided you understand what it measures. Overwatering kills a large share of indoor plants. Waterlogged soil starves roots of oxygen, which leads to root rot. Leaves yellow and droop, and owners often respond by adding even more water. A moisture reading that warns you before the soil stays soggy can break that cycle.
Light is the next big factor. Many houseplants sold as "easy" still need bright, indirect light, and a vampire face on a dim shelf is a useful nudge. Temperature warnings help with plants placed near radiators, air-conditioning vents or cold winter windows.
A sensor cannot spot everything, though. Pests, poor drainage, the wrong potting mix, a plant that has outgrown its pot, or a lack of nutrients may not show up in any of the readings. A few simple habits still matter most:
- Push a finger a few centimetres into the soil before watering, and water only when the soil is dry for that species.
- Use pots with drainage holes and empty saucers that hold standing water.
- Match the plant to the light you actually have, not the light you wish you had.
- Look at the leaves regularly, including the undersides, for pests or spots.
Used that way, a playful face is a reminder rather than a replacement for attention. For more low-tech growing ideas, see our guide to growing food from kitchen scraps.
Sources: Design and images by Mu Design; Silicon Luxembourg on Mu Design's LUA, June 2019; My Modern Met: Smart planter transforms your houseplant into a virtual pet, July 2019; Digital Trends: Lua smart planter; Wikipedia: Tamagotchi; Wikipedia: Root rot.

COMMENTS