Originally published 2019-05-25.

When Chris Davies broke his wrist in spring 2019, he did not want to spend weeks with a plain white cast. Instead he painted it into a wearable version of the Infinity Gauntlet, the golden glove that the villain Thanos uses in Marvel's Avengers films. He shared the step-by-step photos on Bored Panda, explaining that rather than walk around with a blank cast he had decided to "pimp it".
Who made the Infinity Gauntlet cast, and when
The project appeared online in April 2019, just before Avengers: Endgame arrived in cinemas, which helps explain why it spread so quickly. The gauntlet had been the central object of Avengers: Infinity War (2018), where Thanos collects six Infinity Stones and wipes out half of all life with a snap of his fingers. A cast shaped roughly like a gloved forearm was an almost perfect canvas for the reference.
Davies did not say how he broke his wrist, and the post gives no further personal details. What it does give is a clear record of the method, using cheap craft materials that anyone could find:
- gold metallic acrylic paint for the base coat
- craft gems to plan the stones
- gold 3D fabric paint for the raised ridges
- a black marker for outlines
- bronze and black acrylic for shading
- acrylic paint mixed with PVA glue for glossy stones
- a silver pen for highlights
The cast, step by step
The photos below follow the order of his build, from bare cast to finished glove.

The starting point was an ordinary white arm cast. Before any paint went on, Davies turned the whole surface gold with a metallic acrylic base coat, which gave every later layer something to sit on and made the cast read as armour rather than plaster.

Next he tried craft gems against the cast to work out sizes and placement. The six Infinity Stones are the gauntlet's most recognisable feature, so getting their spacing right on a forearm-shaped cast mattered more than copying the film prop exactly.

Planning the layout came with an extra difficulty: Davies is right-handed, and the broken wrist was the one he would normally draw with. He sketched and painted the design with his left hand, which makes the clean lines in the later photos more impressive.

To build the raised ridges of the gauntlet he tested gold 3D fabric paint, the puffy paint normally used on T-shirts. It dries into a relief line, a cheap way to suggest metal plating without sculpting anything.

This frame appears to come from the same test stage, checking how the 3D paint behaves on the cast's curved surface. Fabric paint needs time to set, so working in small sections avoids smudging.

With all of the 3D paint applied, the cast now has the segmented, plated look of the comic and film glove. At this point the shape of the design is finished and the remaining work is about depth and colour.

Black marker went in next to outline the plates and define the edges. Dark lines are a common trick in prop painting because they make raised details visible from a distance and in photographs.

Metallic bronze and black acrylic were added to smooth the transitions and paint shadows into the recesses. This weathering step stops the gold from looking flat and toy-like.

The first test of painting the gems shows how the stones were coloured by hand. Davies built the colour up in several thin coats and used a hairdryer to speed up drying between them.

He mixed PVA glue into the gem paint, which helps it grip and leaves a glossy, jewel-like finish once dry. The six colours echo the Space, Mind, Reality, Power, Time and Soul Stones of the Marvel films.

A silver pen added small highlights on the edges and stones, the last detail that catches light in a photo. Small highlights like these are what make painted surfaces look metallic rather than yellow.

The finished cast, shown in full. It went viral in spring 2019, in the weeks around the release of Avengers: Endgame, when interest in Thanos and his gauntlet was at its peak.
Thinking of decorating your own cast?
Decorating casts is an old tradition, from signatures and doodles to full artworks, and many hospitals now offer casts in bright colours. If you want to try something like this, ask the clinic that fitted the cast first: they can tell you whether paints, markers or glue are fine for your type of cast and how to keep it dry and clean. Avoid anything that seals the edges, adds weight or makes the cast harder to check, and never cut or reshape it yourself.
If your cast cannot be painted, a separate costume piece gives you the same fun with none of the risk. A slip-on sleeve, or a cardboard and foam gauntlet worn on the other arm, can borrow every technique shown here: a metallic base coat, puffy-paint ridges, dark outlines and glossy stones.
Why this simple idea worked so well
The design does not copy the film prop exactly, and it does not need to. People recognise the gauntlet from a few strong features: gold plating, ridged segments and a row of coloured stones on the back of the hand. Davies concentrated on those, and the shading and highlights did the rest. It is a good lesson for any fan craft: choose the details that make something recognisable and spend your effort there.
It also turned a dull few weeks of recovery into something to show off. Plenty of people who break a bone find the cast is the most visible part of the experience, and turning it into a conversation piece is a cheerful way to live with it.
Sources: Chris Davies on Bored Panda: After breaking my wrist, I turned my plain cast into Thanos' Infinity Gauntlet. Photos: Chris Davies.

COMMENTS